Automatic loading machine is an effective and automatic loading equipment, which is widely used in various industrial production fields. The following is the operation flow of automatic feeding machine:

　　I. Preparation

　　Check whether the power connection is normal, make sure the power switch is off.

　　Check whether the parts of the feeding machine are intact and undamaged, especially whether the conveyor belt, hopper, motor and other parts are firm and reliable.

　　Confirm whether the direction and size of the conveyor belt of the feeding machine are in line with the equipment, and whether the tension of the conveyor belt is appropriate.

　　According to the production needs, prepare the materials to be fed, and according to the requirements of the pretreatment (such as drying, screening, etc.).

　　Second, start the equipment

　　Turn on the power switch, start the feeding machine motor, pay attention to observe whether the motor is running normally, there is no abnormal noise and odour.

　　Adjust the speed of the conveyor belt of the feeding machine, according to the production demand.

　　Open the conveyor belt of the hopper, adjust the speed and angle to ensure that the material can be smoothly transported to the specified position.

　　Third, operate the equipment

　　Place the materials in the hopper according to the production plan, pay attention to controlling the quantity and size of the materials to avoid causing stagnation or damage to the conveyor belt.

　　Observe the operation of the loading machine, pay attention to whether the conveyor belt runs off, whether the material is transported smoothly, etc..

　　Dispose of stagnant materials on the conveyor belt in time to avoid equipment damage or production accidents.

　　According to the production demand, adjust the parameters of the feeding machine, such as conveyor belt speed, material temperature, etc., to ensure production efficiency and product quality.

　　Fourth, stop the equipment

　　After completing the production task, turn off the conveyor belt motor and hopper motor of the feeding machine, and then turn off the power switch.

　　Check whether the parts of the feeding machine is normal, especially the conveyor belt, hopper, motor and other parts are firm and reliable.

　　Clean up the environmental hygiene around the equipment, keep the equipment clean and tidy.

　　V. Maintenance

　　Regularly check whether the connection of the parts of the feeding machine is firm and reliable, especially the fastening of the conveyor belt, motor and other key parts.

　　Regularly clean up the residues and impurities inside the equipment to keep the equipment clean and hygienic.

　　Regularly check whether the lubrication system of the equipment is normal, add lubricant or replace grease in time.

　　Regular overhaul and maintenance of the equipment to ensure the normal operation of the equipment and extend the service life of the equipment.

　　When the equipment is not used for a long time, the power switch should be turned off, and do a good job of equipment dust, moisture, sun and other measures.

　　Sixth, safety precautions

　　Before operating the equipment, safety training and operating procedures should be carried out to master the knowledge and skills of safe operation.

　　When operating the equipment, wear labour protection articles, especially gloves and helmet.

　　During the operation of the equipment, it is forbidden to carry out repairs and maintenance on the equipment, which should be carried out after stopping the machine.

　　Before using the equipment, check whether the power cord of the equipment is intact, and whether the plug is loose or broken.

　　When using the equipment, it should be operated and maintained in accordance with the requirements to avoid causing safety accidents and equipment damage.